#3 - Valspar Industrial Mix PB500 - Sealer Mode
PB500 is a transparent 2K Polyurethane non-sanding isolating sealer and adhesion promoter for OEM and cured topcoat finishes.
PB500 can be tinted up to 20% with VIM colour toners as a wow primer/sealer.
Solvent resistant surfaces must be dry and free from any contamination, e.g. oil, grease, release agents etc.
Use a quality solvent degreaser to clean existing paint finishes.
Your choice - Transparent or Coloured options
| Application Data | ||
|---|---|---|
| Transparent version: | Use only PB500 Primer Binder DTM | 100 Parts |
| Colour version: (By volume) |
PB500 PU Primer Binder DTM Tintable CT101 - CT142 Range of VIM Colour Toners |
80 Parts 20 Parts |
| Application: | 1 full coat |
| Recoatable: After 45 minutes/20°C |
After 24 hours: Sanding required (P280-P360 or grey scuff pad) |
| Topcoat: | TB500/510/520/540/543/TW518/TY518 |
For further information refer to the product TDS or contact your local VIM Representative.
This tip was originally written for DBNZ Coatings and has been re-posted with permission.
Download Tech Tip #3Size: 353KB | File Format: .pdf
