This custom cleared table top was completed for Shaneel from CAL Isuzu for use as a desk top in their office.
The project was completed by Avnil Chandra from Linkup Hamilton in the training centre, and allowed the team to trial the Norski Epoxy Doming Resin, with the OECE range used for finishing off the clear to produce the beautiful final product.
- Step 1: Prep
- Sand the wood surface to flatten the contour with Oslong P80 grit
- Step 2: Apply Norski Epoxy Doming Resin
- Step 3: Prep after completion of Norski Epoxy Doming Resin application
- Sand with Oslong P240 grit
- Step 4: Spray application of OECE 230-0030 Polyurethane Clear Sealer
- Step 5: Spray application of OECE 210-0037/10 Polyurethane Clear Top Coat 10% Gloss
- Wipe clean the substrate
- Spray the OECE 210-0037/10 Polyurethane Clear Top Coat 10% Gloss